Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Product Info
Tech Specs
Related Products
The PM-1T is a tray that mounts above a projector using a standard (1.5" I.D.) round projector pole or any smaller round or rectangular pole. The tray accommodates up to two FP-PA20 Audio Power Amplifiers (for stereo operation) and two PS-24U2 Power Supplies. There is adequate space remaining for associated STICK-ON and TX series modules. If two FP-PA20 type amplifiers are not used, multiple STICK-ON, FLAT-PAK and TX series modules may be mounted. Examples of typical tray-mounted modules may include STICK-ON series power amplifiers. Headphone amplifiers, VCA modules, line amplifiers, video amplifiers or distribution amplifiers may also be mounted.
- Related Mount Product Types - Other
- Depth: 10 in
- Height: 2.50 in
- Width: 11.20 in
- Shipping Weight: 3.80 lbs
FP-ALC1
- Automatic Level Control - Mono - Terminals
FP-ALC2
- Automatic Level Control - Stereo - Phono Jacks
FP-AVDA4
- Stereo Audio/Video Distributor-1x4, Phono Jacks
FP-BUC2
- Balanced to Unbalanced Converter-2 channel
FP-CH8
- Chime Generator
FP-DFC2
- Digital Audio Format Converter (24/192)
FP-MP1
- Studio Quality Mic Preamp w/ Phantom - Terminals & XLR
FP-MPA2
- Dual Mic Phantom Adapter 12, 24, 48 V - XLR
FP-MR2
- FP-MR2 Message Repeater
FP-MX4
- 4 Mic or Line Input Mixer - Mic and Line Out
FP-PA20
- Power Amplifier - 20 W 8 ohms
FP-PA20A
- 20 W Mono Audio Amplifier, 70 V or 100 V
FP-PA20B
- 20 W Mono Audio Amplifier 25 V
FP-PEQ3
- 3 Band Parametric Equalizer, Terminal blocks and RCA jacks
FP-SPR1
- SPDIF Repeater / Amplifier
FP-UBC2
- Unbalanced to Balanced Converter - 2 Channel
FP-UBC6
- Unbalanced to Balanced Converter - 6 Channel
FP-VDA4
- NTSC/PAL Video Distribution Amp - 1x4 - BNC
ST-CL2
- Line Level Compressor/Limiter
ST-CX2
- Two Band Active Line-level Crossover
ST-CX2S
- Subwoofer Crossover Filter
ST-GCA3
- Gain Control Amplifier - Line Level
ST-HP3
- 300 Hz and 500 Hz High Pass Filter
TX-10B
- Bridging Input Transformer
TX-1A
- Adjustable Balanced to Unbalanced Transformer.
TX-1W
- Music on Hold Amplifier - 1 Watt
TX-70A
- Unbalanced Line Output Speaker Level Input Interface
TX-8i
- Headphone Isolation Transformer
TX-A2
- Audio Converter - Balanced to Unbalanced
TX-A2D
- Dual Audio Converter - Balanced to Unbalanced
TX-AFC1F
- Balanced to Unbalanced Audio Transformer
TX-AFC1M
- Unbalanced to Balanced Audio Transformer RCA, XLR
TX-AT1
- 600 ohm 1:1 Audio Isolation Transformer
TX-AT1S
- Audio Isolation Transformer with Suppression
TX-AVX
- Automatic Video Switch, BNC
TX-J2
- Unbalanced Input Transformer - Unbalanced stereo inputs to summed balanced mono output
TX-LC2
- Unbalanced to Balanced Line Combiner
TX-LM2
- Line Level to Mic Level Transformer
TX-MVX
- 2x1 Manual Rmt Controlled Video Switch, BNC
TX-MX2R
- Audio Mixer / Distribution Amplifier
TX-PCR1
- Paging Controlled Relay
TX-PSD1
- Paging Sound Detector
TX-TPR3A
- Active Three-Pair Receiver - Twisted Pair Format-A - balanced line outputs
TX-TPR6A
- Passive Single-Pair Receiver, Twisted Pair Format-A
TX-TPS1A
- Active Single-Pair Sender, Twisted Pair Format-A
TX-TPS3A
- Active Three-Pair Sender, Twisted Pair Format-A
TX-TPS6A
- Passive Single-Pair Sender, Twisted Pair Format-A
TX-VCR
- Video Controlled Relay - BNC
TX-VLA1
- Video Line Amplifier - Adjustable Gain and EQ
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact ESA Communications Ltd.
close
ESA Communications Ltd.
#27 – 2861 Sherwood Heights Dr.
Oakville, ON L6J 7K1
Canada
(905) 216-0500
www.esacommunications.com
Contact in regards to this product:
Radio Design Labs
Model: PM-1T
Request more information from a dealer near you
close
Request more information from a dealer near you