Mugello-KH3 I Medium Line-array Element in K-array Mugello Series
Model: Mugello-KH3 I
- 2x 12-inch neodymium magnet woofers with 2.5-inch voice coil
- 2x horn loaded compression drivers with 2.5-inch voice coil
- 4-ch Class-D amp module 1500W at 4-ohms per channel
- Built-in DSP featuring:
- Channel Grouping: group controls over multiple channels
Incredibly flat and lightweight, the new Mugello-KH3 I is the medium line array element in K-array Mugello Series. The self-powered speaker is comprised of two 12-inch neodymium magnet woofers each with a 2.5-inch voice coil and two compression drivers with a 2.5-inch voice coil. Up to 3x Mugello-KH3P I passive line array elements can be driven by a single active Mugello-KH3 I thanks to its powerful four-channel Class-D 1500W at 4-ohms amplifier module with DSP.
The Slim Array Technology of the Mugello-KH3 I allows for a better impulse response and guarantees unique cardioid polar pattern over its entire frequency range. Along with the mechanical steering, K-array’s Electronic Beam Steering technology gives the Mugello-KH3 I the ability to digitally adjust the dispersion of the sound beams to ensure the perfect aiming of the sound field.
- 2x 12-inch neodymium magnet woofers with 2.5-inch voice coil
- 2x horn loaded compression drivers with 2.5-inch voice coil
- 4-ch Class-D amp module 1500W at 4-ohms per channel
- Built-in DSP featuring:
- Channel Grouping: group controls over multiple channels
- Input EQ: 3 bands fully parametric equalizer
- Output EQ: 8 bands fully parametric selectable filters: Peaking, High-Shelf, Low-Shelf, High-Pass, Low-Pass, HP-Butterworth, LP-Butterworth
- FIR filters for digital steering
- Dynamic limiters
- Signal routing: freely assignable input-to-output signal path with level adjustment
- Channel delay up to 230ms
- Remote control via web app or dedicated K-framework3 tuning, monitoring and acoustical simulation software
- Accessories available for ground stacking and suspended array configurations
- Mechanically compatible with Thunder-KS line subwoofers
- Available in black and custom RAL color
- Spec Sheet available - Yes
- Speaker Diameter (Driver): 12 in
- Maximum Frequency Response (Bandwidth): 19 kHz
- Maximum Frequency Response (Bandwidth): 19000 Hz
- Minimum Frequency Response (Bandwidth): 120 Hz
- Minimum Frequency Response (Bandwidth): 0.12 kHz
- Construction: Polyurea coated birch plywood
- Coverage Horizontal: 110 degrees
- Coverage Vertical: 20 degrees
- Impedance: 4 ohm
- Maximum SPL (Sound Pressure Level): 144 dB
- Power Handling: 1500 Watt
- AC Voltage (Maximum): 240 Volts
- AC Voltage (Minimum): 100 Volts
- Active Power: 600 Watt
- Depth: 8.27 in
- Height: 14.57 in
- Width: 47.64 in
- Product Weight: 96.12 lbs
- Color: Black
- Sustainability Rating: IP53
Suggested Products
ESA Communications Ltd.
#27 – 2861 Sherwood Heights Dr.
Oakville, ON L6J 7K1
Canada
(905) 216-0500
www.esacommunications.com