Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers

Request Quote
All Products
SPC Series 20A Power Sequencer/Conditioner/Surge Suppressor
Series: Power Sequencer
Model: SPC-20
- Fully solid state, zero crossing, AC switching, 20A capacity
- Advanced surge suppression on all the AC outputs with LED indicating active protection
- Line conditioning and RFI suppression on the AC input
- Full sequencing on both power up and power down
- Two AC outlets , one on the front and one on the rear, are active all the time
Product Info
Tech Specs
Related Products
Documents
SPC-20 is an AC power conditioning and sequencing system, provides in depth surge protection as well as superior RFI suppression. It can be expanded to power any number of additional circuits all connected via a six wire low voltage line. It switches the line with solid state devices insuring an extremely long trouble free life, there are no mechanical relay contacts to arc or pit and disrupt the systems operation.
- Fully solid state, zero crossing, AC switching, 20A capacity
- Advanced surge suppression on all the AC outputs with LED indicating active protection
- Line conditioning and RFI suppression on the AC input
- Full sequencing on both power up and power down
- Two AC outlets , one on the front and one on the rear, are active all the time
- An alarm terminal to sequence the system down when tripped
- 19-inch rack mounted equipment occupying only one rack unit space
- UL Rated - Yes
- Spec Sheet available - Yes
- UL Rated: Yes
- AC Switching: Solid state zero crossing (no relay contacts that bounce, arc, and pit)
- AC Input: Full line conditioning and RFI suppression
- AC Outlets: Surge suppression on all outlets
- Spike protection modes: Line to neutral, neutral to ground, line to ground
- Spike protection voltage: Max clamping voltage 340V peak, L-N, N-G, L-G
- Response Time: 1 ns
- Maximum load protection: >100,000A (8 x 20usec pulse)
- Noise attenuation: Differential 13dB @ 150kHz increasing to 45dB at 30MHz
- Common mode: 15dB at 150kHz, increasing to >45dB @ 30MHz
- Switching Delay: 1 to 10 seconds adjustable on the rear panel
- Remote Connector: Includes all connections for remote control of the unit (pluggable screw terminal connector)
- Remote Control: Momentary or maintained closure will operate this equipment
- Certifications: UL
- Current Rating: 20 Amps
- Number of Sequence Events: 3
- Cord Length (in/mm): 72 in
- Color: Black
- Warranty (Length/Type): 3 Years
- AC Voltage: 120 Volts
- Depth: 8.50 in
- Height: 1.75 in
- Width: 19 in
- Product Weight: 14 lbs
FSR LIT1199 SPC-20 SPEC SHEET.pdf
1353 kb
- Data Sheet
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact ESA Communications Ltd.
close

ESA Communications Ltd.
#27 – 2861 Sherwood Heights Dr.
Oakville, ON L6J 7K1
Canada
(905) 216-0500
www.esacommunications.com
Contact in regards to this product:
FSR, Inc.
Model: SPC-20
Request more information from a dealer near you
close
Request more information from a dealer near you