Pro AV Catalog
FSR, Inc. - CB-224S
Request Quote
All Products

CB-224S 2' x 2' Ceiling Box with 4 Rack Spaces, Projector Mount Adapter, Smart AC and Fan

Series: Ceiling Box

Model: CB-224S

  • Design to carry pull-down 4RU rack cage that is 12-inch high, and capable of carrying 25lbs of electronic equipment
  • Available in 4 versions, non-pole mount and pole mount, both with/without smart electronics
  • Pull-down handle
  • Cable guides
  • 4RU rack cage with gas-spring assisted ball-bearing slide
Compare
Project List
Product Info
Tech Specs
Related Products
Documents
CB-224 series is a 2x2ft high capacity ceiling box designed to fit into a standard 2x2/2x4ft drop ceiling. It features a drop-down 4RU cage for easy installation and mounting of rack equipment. Cable guides for service loops are provided to allow the equipment to be connected in the down position and then slid up into place. The drop-down cage features pneumatic assistance to counter some of the weight of the equipment installed. The CB-224 has 6 AC outlets in the box and 1 in the room. A master power switch is accessible from the room. The P-option adds an adapter for projector pole mounting. This allows cabling to pass from inside the ceiling box, down the pole and to the projector, providing a nice clean installation. The S-option adds cooling fans and the smart power module. This module allows the power in the box to be either remotely controlled or switched based on the current draw of specific outlets. In this energy saving mode, the power in the box is switched on and off automatically with the projector to conserve power. The CB-224RKRL optional rack rail hardware kit adds two additional rack spaces at the rear of the CB-224 cage for cable management and mounting of accessories.
  • Design to carry pull-down 4RU rack cage that is 12-inch high, and capable of carrying 25lbs of electronic equipment
  • Available in 4 versions, non-pole mount and pole mount, both with/without smart electronics
  • Pull-down handle
  • Cable guides
  • 4RU rack cage with gas-spring assisted ball-bearing slide
  • Edge-protected bundled cable inlet cavity on each side of box, filled with flame retardant foam seal
  • 1/1.25/1.50-inch trade-size knockouts, one set per side of box, with two 0.5/0.75-inch trade-size KOs for line voltage wiring
  • 1.375-inch clear space on both sides of rack cage when inside box, to allow for wire bundles
  • 2RU of angle-adjustable rack mounting surfaces to facilitate mounting and visibility of 1-RU/2-RU patch panels
  • 5 internal outlets and 1 external outlet
  • Applicable for conference centers, schools, general meeting facilities, training facilities, airports and museums
 
Request Quote
 

Suggested Products