CAT6 A/B Switch Latching RJ45 Controlled Dry Contact

Model: SW1040A

Switch ports are transparent and can handle speeds up to 10 Gbps.
Manual control of the switch port connection supported through pushbutton switches.
Connection maintained if power fails or is removed.
Connecting (shorting) input A (pin 1) to Ground (pin 2) for a minimum of approximately 100 msec will cause the unit to switch to the A position.
Connecting (shorting) input B (pin 3) to Ground (pin 2) for a minimum of approximately 100 msec will cause the unit to switch to the B position.

Compare

Project List

Product Info

Tech Specs

Documents

Durable and reliable. Tested to 1,000,000 cycles

Manual control of the switch port supported through A/B push button on the front.

Can be switched remotely via dry contact as well.

Switch ports are transparent and can handle speeds up to 10 Gbps.
Manual control of the switch port connection supported through pushbutton switches.
Connection maintained if power fails or is removed.
Connecting (shorting) input A (pin 1) to Ground (pin 2) for a minimum of approximately 100 msec will cause the unit to switch to the A position.
Connecting (shorting) input B (pin 3) to Ground (pin 2) for a minimum of approximately 100 msec will cause the unit to switch to the B position.

sw1040a_sw1041a_rev1_20320.pdf 2582682 kb - Instructions

Project List

by Crestron Electronics, Inc.

by NETGEAR AV

by NETGEAR AV