60000 Lumens 4K 3-chip DLP RGB Laser Large Venue Projector
Model: XDL-4K60
Part #: R9006685
- Stunning experiences thanks to high-brightness 4K images in REC 2020 colors
- Low total cost of ownership thanks to laser light source and brightness levels
- Reduced installation time through zero alignment
The XDL-4K60 generates no less than 60,000 lumens brightness with colors that are just extraordinary. For bigger screens, more pixels, more impact. Plus incredible RGB laser performance, signal flexibility up to a comfortable 120 Hz, and no alignment.
Images that speak
Offer visitors crisper, more realistic contrast for greater impact with images of breathtaking depth thanks to their native 4K resolution up to 120Hz. And when you need it, use brightness up to a massive 60K lumens.
Cost-saving design
Want to drive down your cost-per-lumen? A single XDL is the answer. Their RGB laser light source slash image flicker and lamp-related costs and maintenance (such as lamp replacements). Compared to xenon projectors, the XDLs also consume 40% less power - and you can re-use your existing Barco XLD+ lenses. Truly reliable, expect a lifetime of up to 20,000 hours with minimum downtime.
Easy to set up and use
Installing one projector is always easier than having to install several. It means less equipment to transport and set up – and fewer possible points of failure. XDL speeds up installation by reducing alignment time. The projectors provide an exceptional lens shift of up to 100% so you can install them anywhere you like. You can also easily match images to your projection surface using on-board real-time warping and blending.
3D that really stands out
Get the absolute most impact with superb 3D performance based on color separation using twin wavelengths and a more effective use of light. Forget the issue of ghosting – there is none. And project onto white rather than silver screens.
- Stunning experiences thanks to high-brightness 4K images in REC 2020 colors
- Low total cost of ownership thanks to laser light source and brightness levels
- Reduced installation time through zero alignment
- 3D Ready - Yes
- Number of Imagers - 3-chip
- Projector Applications - Other
- Projector Technology Type - DLP
- Supported Resolution - 4K (4096x2400)
- Spec Sheet available - Yes
- Brightness: Up to 28,000 center lumens using HC lenses
- Control: XLR wired + IR, RS232, Wifi, GSM (opt)
- Light Source: Direct coupled RGB lasers 6P
- Power Consumption: Projector at full laser power: 3.5 kW (2D or Polarization 3D)/2.0 kW (Barco Laser3D - 6P)
- Power Requirements: Projector: 200-240/346-415V 50-60Hz 16A 3W+N+PE (Y connection)/Power cord size range: 4 sq mm to 6 sq mm, 10AWG to 8AWG /Circuit breaker range: 25A to 40A, 200-240V 3W+PE 28A 50-60Hz (connection)/Power cord size: 6 sq mm, 8AWG/Circuit breaker: 40A
- Resolution: 4,096 x 2,160
- Weight: Chiller: ~115kg (~250lb)
- Picture-in-Picture: Two sources simultaneously
- Regulatory Compliance: HDCP
- Operational Humidity: 5-80% (non condens)
- Technology: 1.38-inch DMD™ x3
- Communication Ports: RS232
- Inputs: Slot 1 :Dual HDBt; HDMI 2.0 (HDCP 2.2); DP 1.2 (HDCP 1.3); Quad SDI/HDSDI/dual HDSDI/6G/BarcoLink, Slot 2: Quad DP1.2
- Safety Class: Class 1, RG3
- Dimensions (WxLxH): One chillers, with the following dimensions: 701 x 701 x 800 mm/27.6 x 27.6 x 31.5 inches
- Network Connection: 10/100 base-T, RJ-45 connection, Wifi (optional)
- Projector Type: Native 4K 3-chip DLP digital projector up to 120Hz
- Input Resolutions: From NTSC up to 4K (4,096 x 2,160) 120Hz
- Color Correction: P7
- ScenergiX: Horizontal and vertical edge blending, Direct adjust OSD + toolset
- Orientation: Tilt 45° up and 30° downwards, Rotation - 20 degrees/+90 degrees (=Portrait)
- Sealed DLP™ core: standard
- Native Contrast Ratio: 2,800:1 (typical using HC lenses)/500:1 ANSI contrast (typical), 2,000:1 (typical using HB lenses)/450:1 ANSI contrast (typical)
- Optical Lens Shift: V: -100% to +100%/H: +/- 40% (lens dependent)
- Brightness Full: 60000 lumens
- Lamp Life Full: 20000 hours
- Chip Quantity: 3
- Prime Lenses: HC: 1.13-1.65; 1.35-1.86; 1.46-2.10; 1.65-2.60; 2.00-3.35/HB : XLD 0.8;1.45-1.8;1.8-2.4;2.2-3.0;2.8-5.5;5.5-8.5
- Optical dowser: Standard
- integrated web server: Yes
- CLO (constant light output): Standard
- Software tools: Projector Toolset
- Certifications: UL, CE, FCC
- Operating Temperature (Maximum): 95 F
- Operating Temperature (Minimum): 50 F
- 3D systems: Color3D (Barco Laser3D): Native 6-primary color-3D system. Only requires color filter glasses/Active glasses systems/Polarization recuperation systems
- Cooling liquid hose length: 2.5-5-10m (8.2-16.4-32.8ft)
- Chillers: 230/400V 3W+N+PE 16A, 2.5 sq mm (Y connection) or 208V/3W+PE (connection)/Max. 16A per phase
- Depth: 56.89 in
- Height: 27.80 in
- Width: 29.29 in
- Product Weight: 518.09 lbs
ESA Communications Ltd.
#27 – 2861 Sherwood Heights Dr.
Oakville, ON L6J 7K1
Canada
(905) 216-0500
www.esacommunications.com