Pro AV Catalog
Tripp Lite - NPOE-30W-1G-INT
Request Quote
All Products

Gigabit PoE+ Midspan Active Injector - IEEE 802.3at/802.3af, 30W, 1 Port, International Plug Adapters

Model: NPOE-30W-1G-INT

  • Saves money by delivering 30W of power + data up to 100 m through existing cabling
  • Extends power + data to any PoE or PoE+ device installed where no AC outlet is available
  • Supports Gigabit Ethernet data transfer speeds up to 1000 Mbps (1 Gbps)
  • Quick and easy plug-and-play installation with no configuration necessary
  • Compact, hand-sized plastic housing ready for mounting on any smooth surface
Compare
Project List
Product Info
Tech Specs
Documents

Adds a PoE Device to Your LAN Without Adding a PoE Switch
Now you can add a surveillance camera, wireless access point, VoIP phone or other PoE (Power over Ethernet) device to your home or office network, even if your network switch doesn’t support PoE. Instead of making an expensive upgrade to a PoE switch, you can use this single-port PoE+ injector to send 30 watts of power, as well as Gigabit Ethernet data, through your existing Cat5e/6/6a cabling.

Saves You Time and Money on Unnecessary Equipment Updates
This compact PoE+ injector delivers 10/100/1000 Mbps of data and up to 30 watts of power using existing Cat5e/6/6a cables. That means, in addition to not buying a new PoE network switch, you also don’t need to install new AC power lines and electrical outlets. This cost-effective midspan injector sends DC power and Ethernet data through your Ethernet cable, cutting down on cable clutter, equipment costs and installation time and labor.

Expands Your PoE Network Up to 100 Meters
The NPOE-30W-1G-INT delivers both power and data to any IEEE 802.3at (PoE+) or IEEE 802.3af (PoE) device up to 100 meters (328 feet) away. This allows you to install a device in a building lobby, on a ceiling, inside a warehouse or anywhere else an AC power outlet is unavailable. The PoE+ injector supports full-duplex 2 Gbps communication for sending and receiving data simultaneously. It also protects your device against short circuits, high voltage and overloads.

  • Saves money by delivering 30W of power + data up to 100 m through existing cabling
  • Extends power + data to any PoE or PoE+ device installed where no AC outlet is available
  • Supports Gigabit Ethernet data transfer speeds up to 1000 Mbps (1 Gbps)
  • Quick and easy plug-and-play installation with no configuration necessary
  • Compact, hand-sized plastic housing ready for mounting on any smooth surface
  • HOME
  • /
  • PRODUCT CATALOG
  • /
  • POWER OVER ETHERNET (POE)
  • /
  • NPOE30W1GINT
  • Voltage Incompatibility
  • This product is not compatible with the voltage in your country. [MP004]
  • NPOE-30W-1G-INT front view large image | Power over Ethernet (PoE)
  • NPOE-30W-1G-INT front view small image | Power over Ethernet (PoE) NPOE-30W-1G-INT other view small image | Power over Ethernet (PoE) NPOE-30W-1G-INT other view small image | Power over Ethernet (PoE) NPOE-30W-1G-INT other view small image | Power over Et
  • See All Images
  • Gigabit PoE+ Midspan Active Injector - IEEE 802.3at/802.3af, 30W, 1 Port, International Plug Adapters
  • PoE+ injector uses existing Cat5e/6/6a cable to supply power to a PoE device connected to a non-PoE switch.
  • Saves money by delivering 30W of power + data up to 100 m through existing cabling
  • Extends power + data to any PoE or PoE+ device installed where no AC outlet is available
  • Supports Gigabit Ethernet data transfer speeds up to 1000 Mbps (1 Gbps)
  • Quick and easy plug-and-play installation with no configuration necessary
  • Compact, hand-sized plastic housing ready for mounting on any smooth surface
  • 3-year limited warranty
  • View Full Product Details
  • Tripp Lite Part Number
  • NPOE-30W-1G-INT NEW
  • Write a review
  • Have a Question?
  • Contact Us
  • Similar Products
  • Gigabit PoE+ Midspan Active Injector - IEEE 802.3at/802.3af, 30W, 1 Port NPOE-30W-1G
  • NPOE-30W-1G
  • Gigabit PoE+ Midspan Active Injector -...
  • ; (3)
  • Gigabit Multimode Fiber to Ethernet Media Converter, POE+ - 10/100/1000 LC, 850 nm, 550M (1804.46 ft.) N785-P01-LC-MM1
  • N785-P01-LC-MM1
  • Gigabit Multimode Fiber to Ethernet Me...
  • ; (1)
  • Gigabit Multimode Fiber to Ethernet Media Converter, POE+ - 10/100/1000 SC, 850 nm, 550M (1804.46 ft.) N785-P01-SC-MM1
  • N785-P01-SC-MM1
  • Gigabit Multimode Fiber to Ethernet Me...
  • Gigabit Multimode Fiber to Ethernet Media Converter, POE+ - 10/100/1000 SC, 1310 nm, 2 km (1.2 mi.) N785-P01-SC-MM2
  • N785-P01-SC-MM2
  • Gigabit Multimode Fiber to Ethernet Me...
  • Gigabit Singlemode Fiber to Ethernet Media Converter, POE+ - 10/100/1000 SC, 1310 nm, 20 km (12.4 mi.) N785-P01-SC-SM1
  • N785-P01-SC-SM1
  • Gigabit Singlemode Fiber to Ethernet M...
  • Gigabit SFP Fiber to Ethernet Media Converter, POE+ - 10/100/1000 Mbps N785-P01-SFP
  • N785-P01-SFP
  • Gigabit SFP Fiber to Ethernet Media Co...
  • ; (1)
  • 16-Port 10/100/1000 Mbps 1U Rack-Mount/Desktop Gigabit Ethernet Unmanaged Switch with PoE+, 247W, Metal Housing NG16POE
  • NG16POE
  • 16-Port 10/100/1000 Mbps 1U Rack-Mount...
  • ; (1)
  • Features
  • Specifications
  • Q&A
  • Documents & Downloads
  • Technical Support
  • Features
  • Adds a PoE Device to Your LAN Without Adding a PoE Switch
  • Now you can add a surveillance camera, wireless access point, VoIP phone or other PoE (Power over Ethernet) device to your home or office network, even if your network switch doesn’t support PoE. Instead of making an expensive upgrade to a PoE switch, you
  • Saves You Time and Money on Unnecessary Equipment Updates
  • This compact PoE+ injector delivers 10/100/1000 Mbps of data and up to 30 watts of power using existing Cat5e/6/6a cables. That means, in addition to not buying a new PoE network switch, you also don’t need to install new AC power lines and electrical out
  • Expands Your PoE Network Up to 100 Meters
  • The NPOE-30W-1G-INT delivers both power and data to any IEEE 802.3at (PoE+) or IEEE 802.3af (PoE) device up to 100 meters (328 feet) away. This allows you to install a device in a building lobby, on a ceiling, inside a warehouse or anywhere else an AC pow
  • Simple Plug-and-Play Installation Has Your Device Connected in Minutes
  • No configuration or software is required to add the NPOE-30W-1G-INT to your LAN. Just connect your switch or network jack to the shielded RJ45 LAN port and your PoE device to the shielded RJ45 POE port using existing Cat5e/6/6a cable. Connect the unit’s C
  • Designed for Installation Almost Anywhere
  • Mounting holes are featured for installing the midspan injector on a shelf, desktop, wall or any other smooth surface with user-supplied hardware. The black plastic housing fits in the palm of your hand, so it is small enough to hide away without interfer
  • Package Includes:
  • NPOE-30W-1G-INT Gigabit PoE+ Midspan Active Injector
  • External power supply (Input: 100–240V, 50/60 Hz, 0.75A)
  • (4) International plug adapters (North America, Europe, U.K., Australia)
  • Owner’s manual
 
Request Quote
 

Suggested Products