Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Professional Converge USB Digital Audio Expander
Model: CONVERGE Pro 2 USB Expander
Part #: 910-3200-302
- USB Audio
- 2 x 2 channels - Tx X Rx, with left and right channels
- Professional quality digital audio - 48kHz, 24-bit
- USB 3.0 and USB 2.0 ports compatible
- Windows/Mac compatible
Product Info
Tech Specs
Documents
The USB Expander expands the USB Audio capability of a CONVERGE Pro 2 mixer by providing an additional USB audio interface with 2x2 channels.
This device enables users in different rooms to run UC applications in laptops for a professional quality audio experience using a simple, flexible USB connection.
The USB expander can be daisy-chained with other P-Link peripheral devices such as the Beamforming Mic Array 2, DIALOG 20 Receiver, and GPIO Expander. It can be used as a P-Link distance extender.
- USB Audio
- 2 x 2 channels - Tx X Rx, with left and right channels
- Professional quality digital audio - 48kHz, 24-bit
- USB 3.0 and USB 2.0 ports compatible
- Windows/Mac compatible
- Daisy-chainable
- Maximum 3 USB expanders per CP2 device
- Daisy-chains and co-exists with other P-Link devices
- Extends distance
- By 200 feet (60 meters) from CP2 device
- By 200 feet (60 meters) for other P-Link devices
- Form factor and mounting
- Compact form factor - 1/3rd RU width, 1U height
- Rack-shelf mount
- Under the table mount
- Wall mount
- Ceiling mount
- Connectivity and power
- Direct connection to CONVERGE Pro 2 (CP2), Beamforming Microphone Array 2, and DIALOG 20 Wireless Receiver
- P-Link for power, audio, control from CP2
- PoE Injector for power
- RS-232 connection for control interface
- USB connection for audio
- Applications:
- Unified communication (UC)
- Video conferencing (VC)
- Audio playback
- Audio recording
- Rackmountable - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 14 F
- Number of Channels: 2
- Number of Inputs: 2
- Number of Outputs: 2
- Rack Units (Height): 1
- AC Voltage (Maximum): 240 Volts
- AC Voltage (Minimum): 100 Volts
- Active Power: 3 Watt
- Depth: 1.60 in
- Height: 4.10 in
- Width: 5.50 in
- Product Weight: 0.88 lbs
- USB Audio:
•Port Type: USB-B connector
•Audio: Digital audio, 2 x 2 bidirectional channels
•Sample Rate: 48kHz
•Sample Bit Depth: 24Bit
•Compatible: USB 2.0, USB 3.0
•USB Cable Distance: 16 feet (5 meters)
•Compatible: Windows and Mac OS devices - P-Link Peripheral Bus:
•Ports Type: RJ-45 (Cat5e or Cat6)
•P-Link In and Out: proprietary peripheral bus
•PoE In:
•P-Link In Port
•PoE IEEE802.3AF
•Audio:
•Up to 3 USB Expander units + Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units
•Cable: Solid core 24AWG, factory terminated Cat 5e or Cat 6 cable
•Distance: Up to 200 feet (60 meters)
•Daisy-chain:
•Up to 3 USB Expanders with each CONVERGE Pro 2 unit
•Up to 3 Beamforming Microphone Array 2 units and up to 3 DIALOG 20 wireless
•Receiver units along with up to 3 USB expander units with each supported CONVERGE Pro 2 unit in the same chain
•Up to 6 USB Expander units in the same chain with 2 supported CONVERGE Pro 2 units connected through C-Link - RS232:
•Type: 3 Position (Tx, Rx, Gnd) 3.81mm Grey Header, Male, Phoenix type Euro block connectors
•Support: Serial commands
•Connection: Connect with Touch Panel Controller for CP2, third-party control devices - Power Selection Switch:
•Sensor Type: Slide Switch
•Toggle toward P-Link to power device by P-Link
•Toggle toward PoE to power device by PoE Injector - PoE In Port:
•Port Type: RJ-45 port
•PoE: 802.3af or 802.3at PoE/PoE+ injector input - Configuration and Administration Software:
•CONVERGE Pro 2 CONSOLE software - Front Panel LEDs:
•Power LED:
•Off: Not powered
•Solid Blue: Powered ON
•Status LED:
•Off: No P-Link plugged in
•Solid Blue: P-Link plugged in and system working normally
•Flashing Blue: Locate mode initiated from CP2 CONSOLE Software
•Red: Error condition - Mounting:
•Rack-shelf mount
•Underneath table mount
•Wall mount
•Ceiling mount - Power and Thermal:
•Power Type: PoE/PoE+
•Port Type: RJ-45
•Power Source: P-Link or PoE Injector
•PoE In/P-Link In: 802.3af or 802.3at PoE/PoE+
•Power Source Indicator: Set the position of the Power Select switch to indicate the source of the power (P-Link or PoE)
•Typical Thermal: 10.24 BTU/Hr Max - Dimension and Weight:
•With rack-ears Width x Depth x Height: 6.8x1.7x 4.1-inch or 17.2x4.3x10.3cm - Parts Included:
•Rack Mounting Ears: Pre-installed, Qty 2
•Input Connectors:
•3.81mm Terminal Block Connector, 3 Position (Grey), Qty 1
•USB Cable: USB Type A to Type B, 6 Ft (1.8M), Qty 1
USB Expander
766911 kb
- Data Sheet
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact ESA Communications Ltd.
close
ESA Communications Ltd.
#27 – 2861 Sherwood Heights Dr.
Oakville, ON L6J 7K1
Canada
(905) 216-0500
www.esacommunications.com
Contact in regards to this product:
ClearOne
Model: CONVERGE Pro 2 USB Expander
Request more information from a dealer near you
close
Request more information from a dealer near you