Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Continuously-variable Polar Pattern Condenser Boundary Microphone
Model: 901VP
- Continuously-variable polar pattern control
- Securable variable pattern controls
- Remote Variable Pattern compatible when used with variable pattern control box (VPC-1)
- Remote Variable Pattern through compatible digital signal platforms when used with 40-360 cable
- All metal housing, suitable for commercial applications
Product Info
Tech Specs
Continuously-variable polar pattern condenser boundary microphone is designed to resist interference from devices such as cell phones and two-way communication devices. Integral 80Hz, 12dB/octave high-pass filter removes unwanted low-frequency energy to improve intelligibility. All metal body and shock absorbing rubber bottom make for easy placement on almost any surface. When placed on hard surface, 901VP will take advantage of “boundary effect” signal-to-noise ratio increase. It is terminated with TA3M-type connector recessed in body of microphone. It comes with 30ft [9.1m] of detachable microphone cable that is terminated with standard 3-pin XLRM-type connector.
- Continuously-variable polar pattern control
- Securable variable pattern controls
- Remote Variable Pattern compatible when used with variable pattern control box (VPC-1)
- Remote Variable Pattern through compatible digital signal platforms when used with 40-360 cable
- All metal housing, suitable for commercial applications
- RF (radio frequency) resistant architecture
- Integrated high-pass filter for elimination of unwanted low-frequency energy
- Shock-absorbing rubber pad
- RoHS compliant
- Polar/Pickup Pattern - Other
- Microphone Type - Boundary
- Microphone Type - Condenser
- Microphone Connectivity - Wired
- Operating Principle: Condenser
- Polar Pattern: Continuously-variable
- Maximum SPL: 120 dB (1% THD, 1KHz )
- Power Requirements: P12, P24, P48, 4mA
- Connector: 3 Pin - TA3M-type
- Polarity: Positive pressure on diaphragm corresponds to positive voltage on pin 2 relative to pin 3 at XLR3M-type connector
- RF Immunity: Meets or exceeds EN55103-2, E1, E2, E3 and E4
- Finish: Durable matte-black urethane
- Product Weight: 0.42 lbs
- Impedance: 150 ohm
- Maximum Frequency Response (Bandwidth): 20 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Minimum Frequency Response (Bandwidth): 100 Hz
- Minimum Frequency Response (Bandwidth): 0.10 kHz
- Cable Length: 30 ft
- Wireless: No
- Noise: 22 dBA
- Sensitivity: -33 dBV
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact ESA Communications Ltd.
close
ESA Communications Ltd.
#27 – 2861 Sherwood Heights Dr.
Oakville, ON L6J 7K1
Canada
(905) 216-0500
www.esacommunications.com
Contact in regards to this product:
CAD Audio / Astatic Commercial Audio Products
Model: 901VP
Request more information from a dealer near you
close
Request more information from a dealer near you