5.25" 2-way In-ceiling Loudspeaker with 70/100V Transformer
Series: IC-T
Model: IC-525-T
- 5.25" woofer and 1" titanium diaphragm compression driver
- Easy to install and adjust settings
- Compact design simplifies low-ceiling mounting
- Designed to mix and match with Klipsch CA-T speakers
- Deep bass with less compression
The IC-T series speakers are wider and lower than the previous speaker to facilitate low-ceiling installs. A tile bridge is included with each speaker for installation in ceiling tiles, or where additional reinforcement is required.
The IC-525-T packs proven materials and wide dispersion horn technology into an installer-friendly UL-certified (2043 and 1480) in-ceiling speaker with an integrated back can and multi-tap transformer.
A two-way design the speaker features a 5.25-inch woofer and 1-inch titanium diaphragm compression driver mated to a round Tractrix® Horn with XT technology for smooth response with constant directivity. The 1-inch Tractrix port provides deeper fuller bass with less compression and distortion.
For distributed line applications the IC-525-T features a 70/100 volt multi-tap transformer. A single rotary switch for the 8-ohm bypass and multi-tap setting is conveniently located on the front baffle.
The speaker's included tile bridge allows for easy installation in a suspended ceiling or wherever additional reinforcement of the ceiling material is required. A mudring kit (part # 1010413) can be purchased separately to further simplify drywall installations.
For areas with too high or no suspended ceilings, the addition of the Klipsch KPH-525 Pendant Housing with the IC-525-T provides an alternative, high-aesthetic sound solution.
- 5.25" woofer and 1" titanium diaphragm compression driver
- Easy to install and adjust settings
- Compact design simplifies low-ceiling mounting
- Designed to mix and match with Klipsch CA-T speakers
- Deep bass with less compression
- Horn-loaded for clear sound in any location
- Multi-tap transformer for distributed audio
- Includes tile bridge for installation in any ceiling
- Pairs well with our CA surface mount speakers
- Works with Klipsch KPH-525 Pendant Housing for high/no suspended ceiling installs
- Wider, shorter design to fit low ceilings; multi-tap transformer
- Available in black and white finish
- Loudspeaker Mount Type - Ceiling
- Warranty - Yes
- Loudspeaker Voltage - 70V
- Loudspeaker Voltage - 100V
- Spec Sheet available - Yes
- Speaker Diameter (Driver): 5.25 in
- Maximum Frequency Response (Bandwidth): 20 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Minimum Frequency Response (Bandwidth): 65 Hz
- Minimum Frequency Response (Bandwidth): 0.07 kHz
- 100V Taps: 30,15,7.5 Watt
- 70V Taps: 30,15,7.5,3.8 Watt
- Impedance: 8 ohm
- Power Handling: 65 Watt
- Sensitivity: 89 dB
- Depth: 8.50 in
- Width: 10.75 in
- Product Weight: 8.25 lbs
- Color: Black/ White
- Warranty (Length/Type): 5 Years Limited
- Certifications: UL
- Directivity: 6.5 dB
- Q: 45
- Enclosure Tuning: Vented via a 1-in Tractrix port
- Input Connections: Terminal Strip
- Maximum Acoustic Output: 104 dB@1M
- Coverage Angle: 105 degree
- Thru hole width Diameter: 9 in
- Mounting Depth: 8.313 in
- Cutout Dimension: 9.125 in diameter
- Construction: Bass-reflex via Tractrix port Enclosure
Suggested Products
ESA Communications Ltd.
#27 – 2861 Sherwood Heights Dr.
Oakville, ON L6J 7K1
Canada
(905) 216-0500
www.esacommunications.com