Multi-channel I/O Interface Controller
Model: CERBERUS
- 32 Programmable digital inputs
- 2 Programmable analogue inputs
- 8 Programmable isolated changeover relays
- 2 Internal failure relays
- Monitoring of third party devices using WinControl Server
Cerberus is a dedicated surveillance hub which can be interfaced with other system components - either AXYS products or those of other manufacturers. The unit can be programmed to recognise fault conditions in connected equipment via 32 digital and 2 analogue inputs, and to report faults in a variety of ways, including RS-485 messages and 8 internal volt-free changeover relays.
Any system components – for example, digital audio processing units, UPS’s or emergency sound stores - which are provided with a “fault” tally or “watchdog” output can be connected to Cerberus.
Full surveillance of all components in the audio system can then be achieved at a remote location, and/or secondary backup components can be automatically brought on-line when predefined failures occur.
- 32 Programmable digital inputs
- 2 Programmable analogue inputs
- 8 Programmable isolated changeover relays
- 2 Internal failure relays
- Monitoring of third party devices using WinControl Server
- Bi-directional RS-485 interface with loop through
- Control via RS-485 from WinControl software
- Systems Controlled - Audio
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Rack Units (Height): 1
- AC Voltage (Maximum): 240 Volts
- AC Voltage (Minimum): 100 Volts
- Active Power: 4 Watt
- Depth: 9.13 in
- Height: 1.71 in
- Width: 18.98 in
- Product Weight: 7.05 lbs
Suggested Products
ESA Communications Ltd.
#27 – 2861 Sherwood Heights Dr.
Oakville, ON L6J 7K1
Canada
(905) 216-0500
www.esacommunications.com