512 x 512 Audio Channel Converge Matrix Mixer + Router

Series:

Model: CONVERGE MATRIX 512

Part #: 910-3000-002

Converge matrix 512 supports 512x512 audio channel matrix
Field upgradable to expand with additional 256x256 channels to make it 512x512
Dante networking technology for Digital audio distribution
Audio channels mixing and routing
Compatible with all converge units (840T, 880, 880T, 880TA, 8i, SR1212, SR1212A, TH20, VH20) and connect Dante bridge

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

ClearOne’s converge matrix mixer and router provides new opportunities for large scale pro audio installations with up to 512x512 audio channels, with the CONVERGE product line using Dante™ audio-over-IP networking technologies.

Converge matrix 512 supports 512x512 audio channel matrix
Field upgradable to expand with additional 256x256 channels to make it 512x512
Dante networking technology for Digital audio distribution
Audio channels mixing and routing
Compatible with all converge units (840T, 880, 880T, 880TA, 8i, SR1212, SR1212A, TH20, VH20) and connect Dante bridge
Groups/zones configuration
Full matrix view and filtered matrix view
Highly scalable, reliable and modular system adds flexibility
Complete system redundancy support for network and device
Suitable for sound reinforcement, live announcements, pre-recorded audio, emergency information, background music and paging
Applications:
- Government facilities
- Transportation centers, Airports
- Universities
- Houses of worship
- Stadiums
- Casinos
- Entertainment venues
- Museums
- Amusement parks
- Shopping malls
- Convention centers, expo, auditoriums
- Corporate buildings
- Healthcare centers
- Hotels
- Cruise ships

Matrix Switcher Audio Input Signal Type - Other
Routing Type - Audio
Switcher Audio Signal Type Supported - Balanced
Switcher Type - Audio
Dante Enabled - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 122 F
Operating Temperature (Minimum): 14 F
Maximum Frequency Response (Bandwidth): 22 kHz
Maximum Frequency Response (Bandwidth): 22000 Hz
Minimum Frequency Response (Bandwidth): 20 Hz
Minimum Frequency Response (Bandwidth): 0.02 kHz
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Depth: 10.73 in
Height: 1.72 in
Width: 17 in
Output Impedance: 95 ohm
Input Impedance: 2200 ohm
MIC/LINE INPUTS & OUTPUTS:
- 6 inputs
- 6 outputs
- Push-on mini-terminal block
- Equivalent Input Noise (EIN): 20kHz BW, max gain, Rs = 150 OHM, -126dBu
- Dynamic Range: 20Hz – 20kHz @ 0dB, >105dB
- Crosstalk (Mic/Line): Channel to Channel, stimulus at 20dBu to receptor at -56dBu, 1kHz, <-98dB
- Nominal Input Level: Adjustable -56dB to 0dB, 7dB step coarse gain
- Maximum Input Level: -65dBu to 20dBu
- Phantom Power: Impedance: 6.81k OHM, 48V
- Output Impedance (Mic/Line balanced): 95 OHM, 1%
- Output Level: 0dBu(Nominal), 20dBu (Max), -40dBu (Selectable)
DANTE™:
- Audio channels: 512x512 bidirectional @ 48kHz per pair of primary and secondary Dante ports
- Sample rate: 48kHz/96kHz
- Primary & Secondary network: Gigabit Ethernet RJ45 connector
- Expansion card: Additional 512 x 512 bidirectional @ 48kHz
EXPANSION BUS INPUT/OUTPUT:
- Proprietary Link In & Out ports: RJ45 Cat5e/Cat6 connection for Redundancy setup
Other Ports:
- Ethernet: 10/100 Ethernet Network Port RJ45, auto negotiation
- Serial: RS-232, DB9 Female, Serial Command Protocol Only, 9600/19200/38400/115200 Baud; 8 bits, 1 stop, no parity
- USB: Type B connector, USB 2.0 compatible
- Control/Status: DB25 Female, 8 Open Collector Outputs, 12 Active High Inputs, 5VDC Power Source
- Device Identification: 8 pin DID switch

CONVERGE MATRIX 64 EX - 64 x 64 Audio Channel Converge Matrix Mixer + Router

Router 1272 kb - Data Sheet

Project List

Suggested Products

6x2 4K HDMI Switcher

by Crestron Electronics, Inc.

4-input USB 3.2 Data Matrix Switcher

by Crestron Electronics, Inc.

HDMI 2.0 2x2 Matrix Switcher with Audio Extractor

by Covid, Inc.