Audio Production Equipment : Amplifiers (Audio) : Bogen Communications, Inc. - PS120-G2

120W Gen-2 Platinum Series Amplifier

Model: PS120-G2

New 8-ohm/25V-70V switch and separate output connector blocks on rear panel allows the user to easily select the proper amp output for the type of speakers being installed; no longer will you need an external impedance matching transformer for 70V speaker
Increase design flexibility and enable a wide variety of installation configurations with a single amplifier, allowing either 8-ohm/25V, 70V operation.
120 and 240-watt models
4 Dedicated microphone inputs (XLR connectors MIC 1-4) with selectable phantom power
1 Selectable MIC 5/TEL input

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The next generation of Bogen’s Platinum Series (PS) Amplifiers delivers the highest audio volume for all speaker types at specified power levels, eliminating the need for an external impedance matching transformer. The Gen-2 Platinum Series amplifiers include an internal impedance matching transformer and a rear-panel selector switch with separate connector blocks for both 8-ohm/25V and 70V speakers. These new models also retain the powerful features of the first-generation PS models, including the 5-band full parametric equalizer (EQ).

New 8-ohm/25V-70V switch and separate output connector blocks on rear panel allows the user to easily select the proper amp output for the type of speakers being installed; no longer will you need an external impedance matching transformer for 70V speaker
Increase design flexibility and enable a wide variety of installation configurations with a single amplifier, allowing either 8-ohm/25V, 70V operation.
120 and 240-watt models
4 Dedicated microphone inputs (XLR connectors MIC 1-4) with selectable phantom power
1 Selectable MIC 5/TEL input
1 Selectable MIC 6/AUX 1 input
1 Dedicated AUX 2 input
8-ohm/25V, 70V speaker outputs
5-band full parametric equalizer with independent Gain, Frequency, and Q controls
True loudness contour function on AUX 1 and AUX 2
Audio Enhancement feature for improved voice intelligibility with adjustable level
Lo-cut filter for all MIC channels
Remote master volume control capability (using optional GSRVC)

Spec Sheet available - Yes

Maximum Frequency Response (Bandwidth): 20 kHz
Maximum Frequency Response (Bandwidth): 20000 Hz
Minimum Frequency Response (Bandwidth): 20 Hz
Minimum Frequency Response (Bandwidth): 0.02 kHz
Impedance: 8 ohm
Power Handling: 120 Watt
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Depth: 13.50 in
Height: 3.50 in
Width: 16.50 in
Product Weight: 14 lbs
Color: Black
Signal-to-Ratio Noise: Fundamental: -70 dB or better; AUX 1 and 2: -70 dB; TEL: -70 dB or better at 600-ohms; MIC 1 through MIC 6: -60 dB or better at 200 ohms
Mic: 6 Lo-Z balanced via 4 XLR connectors and 2 pluggable screw terminals, Sensitivity: 11 mV (200 ohms
Aux: 2 Hi-Z RCA jacks. Sensitivity: 0.0 85V (1 Ok ohms)
TEL: Pluggable screw terminals. Sensitivity: 0.07V (600 ohms)
Power Amp In/Pre Out: In 1 V /Out 1 V via RCA jacks
Tape Output: 700 mV at Rated Output via RCA jack
Output Regulation: Better than 2 dB from no load to full load
Current Draw: 1.55 Amps
Variable Mute Range: -60, -21, -10, 0 dB (AUX 1 and AUX 2)
ALC: Distortion: less than 0.5%; Compression: 25 dB (TEL)
VOX Threshold: TEL Input 20 mV (VOX control max. CW position)
MIC/AUX/TEL Precedence: Via pluggable screw terminals. -60 dB: MIC 1, 2, 3, 4, 5/TEL, 6/AUX 1, AUX 2
Power In/Pre Out: In 1V/Out 1V via RCA jacks
Phantom Power: 13V DC
Thermal Protection: Thermistor attached to heat sink

Amplifier 1449168 kb - Data Sheet

Project List

Amplifiers 1498523 kb - Other

Project List

ESA Communications Ltd.
#27 – 2861 Sherwood Heights Dr.
Oakville, ON L6J 7K1
Canada
(905) 216-0500

Contact in regards to this product:

Bogen Communications, Inc.

Model: PS120-G2