Nyquist 4-Channel Matrix Mixer Pre-Amplifier
Model: NQ-P0100
- MIC/line inputs:
- CH1- CH4 configurable balanced/unbalanced inputs via 3 XLR and 4 screw-terminal connections
- CH4 configurable to support Push-to-Talk Mic applications
- CH1 can be configured as a digital AES/EBU (AES3) input
- Line-level monitor output
Bogen’s Nyquist networked 4-Channel Matrix Mixer Pre-Amplifier (MMPA) offers cost-effective performance for permanent installations and commercial sound and is designed to meet the rigorous requirements of today’s sophisticated sound systems. Developed with the commercial sound contractor in mind, the MMPA provides unparalleled flexibility and versatility without the need for add-on modules. It includes state-of-the-art, built-in DSP for extensive and comprehensive signal processing–allowing users to skillfully manage and mix multiple audio input channels. The resulting audio signal mix can be directed to the MMPA’s line out or streamed over the Nyquist network, where it can be used for audio distribution to one or more zones. The MMPA fits a wide range of commercial audio applications that require multi-zone paging and/or background music distribution at businesses, restaurants, retail stores, industrial facilities, and many other venues.
- MIC/line inputs:
- CH1- CH4 configurable balanced/unbalanced inputs via 3 XLR and 4 screw-terminal connections
- CH4 configurable to support Push-to-Talk Mic applications
- CH1 can be configured as a digital AES/EBU (AES3) input
- Line-level monitor output
- Per channel configuration and control via the device Web UI:
- Set master volume/mute/gain
- Define Input-to-Output matrixing
- Any/all channels can be mixed to one or more output (Network or line-level monitor) - Per channel input MIC/line level select
- Phantom power selectable per-channel
- Selectable priority MIC override
- USB 2.0 host port, type-A connector (future use)
- Wall or shelf mounted:
- Rack-mount extension bracket available as an accessory
- 8.25" D x 8.18" W x 1.70" T (2.20" T with rubber feet)
- Preamplifier Signal Type - Audio
- Warranty - Yes
- Spec Sheet available - Yes
- Spec Sheet available - Yes
- AC Voltage (Maximum): 240 Volts
- AC Voltage (Minimum): 100 Volts
- Warranty (Length/Type): 5 Years Limited
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 5 F
- Depth: 8.60 in
- Height: 1.70 in
- Width: 8 in
- Product Weight: 2.60 lbs
- MIC Input Sensitivity (Gain min./max.): Continuously variable from 0.1V to 0.006V RMS
- Mic Phantom Power: +15 VDC
- MIC Equivalent Input Noise (EIN): 100 dB
- Line Input Sensitivity: (Gain min./max.) Continuously variable from 2V to 0.1V RMS
- Line Out Level: 3 V (+10 dB)
- Line Output: 600-ohm electronically balanced, via 3-pin Phoenix on 6-pin Phoenix Plug/Header
- Connectors Power: 10A Line Cord C14 IEC Inlet
- Line/MIC Input: Channels 1, 2 Balanced 3-pin Phoenix Plugs/Headers and Balanced 3-pin Neutrik XLRs;Channel 3 Balanced 3-pin Phoenix on 6-pin Phoenix Plug/Header and Balanced 3-pin Neutrik XLR;Channel 4 Balanced 3-pin Phoenix only via 6-pin Phoenix Plug/Header; RJ45; USB 2.0 Type A
- (PTT) Push-to-Talk Mic Connection: DDU250 or equivalent; 500-ohm impedance with a 4-conductor cable (2 shielded); PTT dry contact switch input on pin-5 of 6-pin Phoenix Plug/Header
- Outputs: Line Out balanced via 3-pin Phoenix on 6-pin Phoenix Plug/Header; Streaming out via Nyquist network
- AES3 (IEC-60958 Type-I) Digital Input: Channel 1 alternately functions as an AES Digital Input (110-ohm Input Impedance)
- AC Input Voltage Range: 85 VAC to 265 VAC 50/60 Hz
- Indicators: Status & Power LEDs (front) / Network LEDs (rear)
- DSP Based Audio Features: 16-band Graphic Equalizer; Signal Present and Clip Monitor; Adjustable High Pass, Low Pass and Bandpass Filters; Noise Gate; Compressor/Limiter; 7-band Parametric Equalizer
- Networking: Cat5 or better 10/100 network connectivity to Bogen's Nyquist network
ESA Communications Ltd.
#27 – 2861 Sherwood Heights Dr.
Oakville, ON L6J 7K1
Canada
(905) 216-0500
www.esacommunications.com