Rack/Wall Mount HDBaseT Extender Transmitter

Model: RS-120-A07-TX

Standard 1RU height, 7" in depth
19" Rack mount or wall mount mounting option
Common rear output connectors for all modules - HDMI, RS-232, USB 2.0
HDBaseT transmitter supports PoE to power the receiver unit at remote location
Swappable modular design to obtain minimum maintenance and upgrade efforts requirement

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

The RS-120-A07-TX Transmitter has modular design and RS-120 was developed to minimize installation time and effort while providing a significant maintenance advantage by way of its ability to swap the transmitter module rapidly. The RS-120-A07-TX transmitter is equipped with the company's ARD-1006-A07-TX HDBaseT transmitter module, featuring an HDMI loopback output, a 2-port 10/100Mbps Ethernet pass through hub, an RS-232 port, IR control, plus power over HDBaseT.

Standard 1RU height, 7" in depth
19" Rack mount or wall mount mounting option
Common rear output connectors for all modules - HDMI, RS-232, USB 2.0
HDBaseT transmitter supports PoE to power the receiver unit at remote location
Swappable modular design to obtain minimum maintenance and upgrade efforts requirement
HDBaseT extender supports 4K ultra high-resolution video, RS-232, USB, IR signals transmission and receiving
Swappable modular design providing maximum flexibility of configuration to fit highly dynamic event requirements

Extender Type - Audio
Extender Type - HDMI
Extender Type - RS232
Extender Type - USB
Extender Type - Other
Rackmountable - Yes
HDBaseT - Yes

Operating Temperature (Maximum): 122 F
Operating Temperature (Minimum): 32 F
DC Voltage: 12 Volts
Depth: 6.96 in
Height: 1.73 in
Width: 18.87 in
Product Specifications:
•Video Bandwidth: 350MHz
•Video resolution: Up to 3840x2160
•Transmission: Cat5e/Cat6 cable
•Extension signal: Video, Audio, remote control, touch control, keyboard/mouse, Ethernet, Power
•RS-232 Signal Type: Full-duplex andbaud rate
•Input video signal: 1.2Vp-p
•Loop-Back: 1x HDMI Loop-Back at TX
•ESD Protection: Human body model - +/-15kV (air-gap discharge) and +/-8kV (contact discharge), Core chipset - +/-8kV
•PCB Stack-up: 6-layer board (impedance control - differential 100-ohm, single 50-ohm)
I/O Communication:
•Input: 1x HDMI 2.0, 1x USB 1x RS-232, 1x IR, 1x 48V DC
•Output: 1x Local out (PSE), 1x HDMI 2.0
•Rack Mount HDBaseT Extender Receiver
•Ethernet Hub: 2x LAN
•HDMI connector: HDMI female
•RS-232 connector: DB-9
•Keyboard and mouse connector: USB Type A
•USB connector: USB Type B
Storage Temperature: -20 to 60 °C
Relative Humidity: 0 to 95 %

RS-120-A07-RX - Rack/Wall Mount HDBaseT Extender Receiver

RS-120-E01 - Rackmount Computer Module

HDBaseT Extender 218130 kb - Other

Project List

HDBaseT Extender 201910 kb - Other

Project List

Suggested Products

USB 2.0 Extender, Cat5e/Cat6, POC

by Covid, Inc.

HDBaseT Box Set, HDMI 4K60 with Local Loop Out

by Covid, Inc.

Digitalinx 3 HDMI w/Audio & USB Wall Plate Extension Kit

by Liberty AV Solutions